HoMedics BP-A04-00CA Instruction for Use download pdf (Page 15)

27 28

TROUBLESHOOTING

If any abnormality arises during use, please check the following points

Note: If the unit still does not work, contact HoMedics Consumer Relations.

Under no circumstance should you disassemble or attempt to repair

the unit by yourself. Contact information for HoMedics Consumer

Relations Department can be found on the warranty page.

SYMPTOMS

POSSIBLE

CAUSES

CORRECTION

Unit does not turn

on when the START/

STOP button is

pushed.

Batteries have

run down.

Replace them with

four new AA

alkaline batteries.

Battery polarities

have been positioned

incorrectly.

Re-insert the batteries

in the correct positions.

EE measurement error

symbol shown on dis-

play or the blood pres-

sure value is displayed

excessively low (or

high).

Cuff has been placed

incorrectly.

Wrap the cuff properly

so that it is positioned

correctly.

Did you talk or move

during measurement?

Measure again. Keep

arm steady during

measurement.

Shaking of the arm with

the cuff on.

E1 error symbol shown

on display

Air circuit abnormality.

Cuff tube may not be

plugged into monitor

correctly.

Check cuff connection.

Measure again.

E2 error symbol shown

on display

Inflation pressure

exceeding 300 mmHg.

Switch the unit off, then

measure again.

E3 error symbol shown

on display

Error determining

measurement data.

Measure again.

Power Source:

Four 1.5V DC (AA) batteries

Measurement Method:

Oscillometric

Measurement Range:

Pressure: 40~280 millimeters mercury (mmHg)

Pulse: 40~199 beats/minute

Accuracy:

Pressure: ±3 mmHg

Pulse: ±5% of reading

Pressure Sensor:

Semi-conductor

Inflation:

Pump driven

Deflation:

Automatic Pressure release valve

Memory Capacity:

99 memories

Auto-shut-off:

1 minute after last button operation

Operation Environment:

Temperature: 50°F~104°F (10°C ~40°C)

Humidity: 15~90% RH

Storage Environment:

Temperature: -4°F~158°F (-20°C~70°C)

Humidity: Less Than 90% RH

Weight:

0.63 lb. (286 g) (without batteries)

Arm Circumference:

Standard size cuff (included): 9”–13” (23-33 cm)

Large size cuff (not included): 13”–17” (33-43 cm)

Dimensions:

4.1”(L) x 5.7”(W) x 2.8”(H)

105mm(L) x 145mm(W) x 70mm(H)

Internally powered equipment

Type BF equipment

IPx0 - No special protection against the ingress of water

Not suitable for use in presence of flammable

anesthetic mixture with air or with Oxygen or

nitrous oxide

Continuous operation with short-time loading

SPECIFICATIONS

Note: These specifications are subject to change without notice.

BPA-040_A.indd 29-30BPA-040_A.indd 29-30 12/1/09 9:42 AM12/1/09 9:42 AM

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

Comments to this Manuals

No comments

HoMedics BP-A04-00CA Instruction for Use Page 15

Comments to this Manuals

Related products and manuals for Blood pressure units HoMedics BP-A04-00CA