HoMedics AR-NC01 Instruction for Use download pdf (Page 4)

6 7

NOTE: Unit will not operate unless nano-coil, pre-filter and grill are properly

installed.

Operating Instructions

Getting Started

• Take the air cleaner out of the box and remove the clear protective plastic bag.

• Place the air cleaner on a firm level surface.

• BEFORE TURNING ON THE AIR CLEANER, if you choose to use the optional

VOC filter, you will need to install it and confirm that all the filters are firmly in place.

Fig. 1

Fig. 2

Fig. 4

Fig. 5

Fig. 6

Fig. 3

1. Open the rear grill by gently pushing

the release tabs toward the outside of

the unit. See Fig. 1

2. Pull the grill away from the body until

the tabs at the bottom of the grill

plate easily slide away from the unit.

See Fig. 2 & 3

3. The pre-filter and nano-coil filter

will be installed already. To install

the VOC/Odor filter (optional), remove

the VOC/Odor filter from the plastic

bag. Place the VOC filter into the

unit flush against the pre-filter,

secured by four clips. See Fig. 4

4. Place the tabs at the bottom of the

grill plate into the base of the unit.

See Fig. 5

5. Hold engaged bottom of the grill

plate in place and push the top of

the grill plate back toward the unit.

The release tabs at the top of the grill

will click back into place. See Fig. 6

TABS TABS

1 2 3 4 5 6 7 8 9 ... 23 24

No comments

HoMedics AR-NC01 Instruction for Use Page 4